Die HP HP0-Y11-Prüfung ist den IT-Fachleute eine unentbehrliche Zertifizierung, weil sie ihres Schicksal bestimmt. Die Schulungsunterlagen zur HP HP0-Y11-Prüfung brauchen alle Kandidaten. Mit ihr kann der Kandidat sich gut auf die Prüfung vorbereiten und nicht so sehr unter Druck stehen. Und die Schulungsunterlagen in Pass4Test sind einzigartig. Mit ihr können Sie die Prüfung ganz einfach bestehen.
Wollen Sie die HP HP0-Y11-Prüfung schnell bestehen?Dann wählen doch unseren Pass4Test, der Ihren Traum schnell erfüllen kann. Unser Pass4Test bietet die genauen Prüfungsmaterialien zu den IT-Zertifizierungsprüfungen. Unser Pass4Test kann den IT-Fachleuten helfen, im Beruf befördert zu werden. Unsere Kräfte sind unglaublich stark. Sie können im Internet teilweise die Fragen und Antworten zur HP HP0-Y11-Prüfung als Probe kostenlos herunterladen, so dass Sie die Glaubwürdigkeit von Pass4Test testen können.
Wenn Sie einen Traum haben, dann sollen Sie Ihren Traum verteidigen. Gorki hat einmal gesagt, dass der Glaube ist ein großes Gefühl und ein kreative Kraft ist. My Traum ist es, ein Top-IT-Experte zu werden. Ich denke, dass ist für mich nirgends in Sicht. Aber Erfolg können Sie per eine Abkürzung gelingen, solange Sie die richtige Wahl treffen. Ich benutzte die Pass4Test HP HP0-Y11-Prüfung Schulungsunterlagen, und habe die HP HP0-Y11 Zertifizierungsprüfung bestanden. Die Schulungsunterlagen zur HP HP0-Y11-Prüfung von Pass4Test sind die bestenTrainingsmaterialien. Wenn Sie wie ich einen IT-Traum haben. Dann gehen Sie Pass4Test kaufen. Pass4Testes wird Ihnen helfen, Ihren Traum zu erfüllen.
Exam Code: HP0-Y11
Prüfungsname: HP (ProCurve Security 7.31)
Warum wählen viele Leute die Schulungsunterlagen zur HP HP0-Y11-Zertifizierungsprüfung von Pass4Test?Es gibt auch andere Websites, die Schulungsressourcen zur HP0-Y11-Zertifizierungsprüfung von Pass4Test bieten. Unser Pass4Test steht Ihnen die echten Materialien zur Verfügung. Unser Eliteteam, Zertifizierungsexperten, Techniker und berühmte Linguisten bearbeiten neuerlich die neueste HP HP0-Y11-Zertifizierungsprüfung. Deshalb klicken Sie Pass4Test Website, wenn Sie die HP HP0-Y11-Zertifizierungsprüfung bestehen wollen. Mit Pass4Test können Sie Ihren Traum Schritt für Schritt erfüllen.
HP0-Y11 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/HP0-Y11.html
NO.1 You have just installed two ProCurve 5406zl switches, one on the second floor and one on the third
floor of your office. You are using 802.1X for port-access authentication. All users have an 802.1X
supplicant installed on their computers and you have configured a RADIUS server with a remote access
policy for each floor. Shortly after connecting the computers, users on the second floor report that they
cannot access any network resources. You can ping the RADIUS server from both switches, but when
you check the RADIUS log, you see authentication requests coming only from the third floor switch. Why
are the second floor users unable to connect to the network?
A. The IP address of the RADIUS server has not been configured on the second floor switch.
B. The second floor computers are using the wrong EAP type for authentication with the RADIUS server.
C. The shared secret configured on the second floor switch does not match the shared secret configured
on the RADIUS server.
D. No default gateway has been configured on the second floor switch, therefore no authentication
requests can reach the RADIUS server.
Answer:A
HP originale fragen HP0-Y11 HP0-Y11 originale fragen HP0-Y11 prüfungsfragen
NO.2 You want to use 802.1X port-access authentication to assign Microsoft Active Directory users to a
particular VLAN
based on user credentials. Which condition must exist?
A. The VLAN ID must exist on the switch.
B. The VLAN ID must be defined in a GVRP configuration.
C. The port through which the user is authenticating must be defined as a member of the VLAN.
D. The user must be a member of an Active Directory Group that has an associated RADIUS remote-
access policy.
Answer:A
HP prüfung HP0-Y11 HP0-Y11 HP0-Y11 HP0-Y11
NO.3 Which EAP method is considered the least secure solution for implementing 802.1X user
authentication on a wireless LAN?
A. SIM
B. MD5
C. TTLS
D. FAST
E. LEAP
F. PEAP
Answer: B
HP HP0-Y11 HP0-Y11 prüfung HP0-Y11 HP0-Y11 zertifizierungsfragen
NO.4 What is an operational difference between the TLS and MD5 EAP methods?
A. TLS uses a challenge/handshake mechanism for authentication; MD5 uses certificates for
authentication.
B. TLS uses a challenge/handshake mechanism for authentication and encryption; MD5 uses certificates
for authentication and encryption.
C. TLS uses digital certificates for mutual authentication; MD5 uses a challenge/handshake mechanism
to authenticate the client to the server.
D. TLS uses a name and password along with digital certificates to produce a session key; MD5 uses a
name and password to produce a session key.
Answer: C
HP zertifizierung HP0-Y11 HP0-Y11 originale fragen HP0-Y11 echte fragen HP0-Y11 HP0-Y11 echte fragen
NO.5 Which statement describing Web authentication support on the ProCurve Switch 5400zl series is
correct?
A. User credentials or a digital certificate can authenticate the client.
B. It is mutually exclusive of other authentication methods on the same port.
C. After successful user authentication, a port is assigned to a VLAN based on an order of priority.
D. If a port is configured to support multiple users, different static untagged VLANs can be assigned
concurrently.
Answer: C
HP HP0-Y11 HP0-Y11 HP0-Y11 prüfung
NO.6 Which statements describing Web authentication support on ProCurve switches are correct? (Select
two.)
A. An SSL-based login is required.
B. It can be configured on ports that also have MAC authentication assigned.
C. A successfully authenticated user can be redirected to a configurable URL.
D. The switch's built-in DHCP, ARP, and DNS services assist with Web authentication while a port is in
the authenticating state.
E. When a client connects to a Web authenticator port and a Web browser is opened, the Web browser is
automatically redirected to the switch's Web-Auth home page.
Answer: CD
HP HP0-Y11 prüfung HP0-Y11 testantworten
NO.7 You have ProCurve Identity Driven Manager currently deployed in your network and have recently
modified an Access Profile. Which task should you perform next?
A. Restart the IDM Agent.
B. Deploy the configuration.
C. Run the Secure Access Wizard.
D. Update the Access Policy Groups.
E. Start Active Directory synchronization.
F. Rediscover switches affected by the changes.
Answer: B
HP HP0-Y11 HP0-Y11 zertifizierungsfragen
NO.8 Network security can be described in terms of multiple layers of security. Which action describes a
perimeter security measure?
A. limiting switch access to SSH
B. deploying 802.1X authentication
C. installing an Intrusion Prevention System
D. using a secure operating system for network applications
Answer: C
HP originale fragen HP0-Y11 antworten HP0-Y11 HP0-Y11 HP0-Y11
NO.9 Which statements describing MAC authentication on ProCurve switches are correct? (Select two.)
A. It can be configured on the same port with Web authentication and 802.1X authentication.
B. The device's MAC address is sent to the RADIUS server as the user name and password.
C. The switch's built-in DHCP server initially assigns an IP address in the 192.168.0.0 private subnet.
D. The switch automatically initiates user authentication of a device when the device communicates on a
MAC authenticator port.
E. Configuration involves defining ports as MAC authenticators, the RADIUS authentication protocol to
use, and then activating the ports for MAC authentication operation.
Answer: BD
HP HP0-Y11 HP0-Y11 HP0-Y11
NO.10 Which protocols are supported by a ProCurve switch for communication with a RADIUS server that is
used to authenticate 802.1X supplicants? (Select two.)
A. EAP-RADIUS
B. MD5-RADIUS
C. CHAP-RADIUS
D. PAP-SPAP-RADIUS
E. MS-CHAPv2-RADIUS
Answer:AC
HP HP0-Y11 dumps HP0-Y11 exam fragen HP0-Y11 prüfungsfrage
NO.11 Click the Exhibit button.
The RADIUS server and switch are correctly configured. The switch has the VLAN assignments and
port-access
commands configured, as shown in the diagram.
What happens to port 10 after the user connects to the network?
A. remains in an unauthorized state
B. becomes a member of VLAN 20
C. becomes a member of VLAN 25
D. becomes a member of VLAN 200
Answer: D
HP prüfungsfrage HP0-Y11 HP0-Y11 zertifizierungsfragen
NO.12 Which statements describing the ProCurve switch debug facility are correct? (Select two.)
A. The instrumentation monitor must be enabled first.
B. Specific debug message categories can be selectively enabled.
C. The debug destinations can be set to a session window and a Syslog server concurrently.
D. Debug messages have the same format as standard Event Log messages including the event type
and timestamp.
Answer: BC
HP prüfung HP0-Y11 zertifizierung HP0-Y11
NO.13 Which two EAP methods support tunneling of a weaker authentication method such as MS-CHAPv2?
A. TLS and SIM
B. PAP and SPAP
C. LEAP and FAST
D. PEAP and TTLS
Answer: D
HP exam fragen HP0-Y11 zertifizierungsantworten HP0-Y11 HP0-Y11 zertifizierungsantworten HP0-Y11 exam fragen
NO.14 A university shares a core routing switch between two departments. Each department has a separate
ProCurve edge switch deployed and neither department wants the other to have management access to
their respective switch. Which security measures can prevent management access by the respective
departments? (Select three.)
A. Enable the Privilege Mode option.
B. Configure Authorized IP Managers.
C. Define Secure Management VLANs.
D. Implement Command Authorization.
E. Use RADIUS authentication with separate policies.
Answer: BCE
HP HP0-Y11 HP0-Y11 HP0-Y11 HP0-Y11
NO.15 Authentication of switch management or general network users can involve multiple network
components. Which statement describing these network components is correct?
A. A user directory server operates as the policy enforcement point.
B. The authentication server is also known as the policy decision point.
C. A ProCurve switch functions as a policy repository for switch management access using a remote user
account.
D. A RADIUS access-accept message is used by a client to acknowledge authentication settings
assigned by the server.
Answer: B
HP HP0-Y11 HP0-Y11 prüfung HP0-Y11 zertifizierungsantworten
NO.16 Which statements describing the 802.1X user authentication process are correct? (Select two.)
A. The supplicant and authentication server must support the same EAP method for the authentication
process to proceed.
B. A switch passes EAP messages between the supplicant and authentication switch without modification
or translation.
C. After a RADIUS server confirms a user is authenticated, the switch sends an EAP-Success message
and sets the port state to authorized.
D. Different RADIUS servers must be configured on the switch if authentication of both switch
management users and 802.1X supplicants will be performed.
E. If a supplicant receives an EAP-Request message specifying a particular EAP method to be supported,
the authentication session is closed if the supplicant does not support that EAP method.
Answer:AC
HP HP0-Y11 dumps HP0-Y11 prüfungsfragen HP0-Y11 dumps HP0-Y11 prüfung
NO.17 Which statement describing dynamic VLAN assignment for 802.1X authenticator ports on ProCurve
switches is correct?
A. If a GVRP-learned VLAN is used, the RADIUS server must specify that attribute.
B. The VLAN used may be statically defined on the switch or learned through GVRP.
C. If a client fails authentication, the port is reassigned to the Secure Management VLAN.
D. If a client is authenticated, but no VLAN attribute is returned by a RADIUS server, the switch blocks the
port.
Answer: B
HP originale fragen HP0-Y11 testantworten HP0-Y11
NO.18 A customer calls you and describes a switch management access problem involving SSH. The
customer indicates that he is denied access after supplying the login credentials. The customer is using a
RADIUS server for centralized authentication, and has used the ping command to verify that the SSH
client, switch, and RADIUS server are all reachable. What is a potential cause of this problem?
A. A self-signed digital certificate has not been installed on the switch.
B. SSH has not been configured for the login access level on the switch.
C. A remote-access policy on the RADIUS server has not been configured to support the CHAP protocol.
D. The digital certificate of the public Certificate Authority used by the switch has not been installed in the
SSH client.
Answer: C
HP HP0-Y11 HP0-Y11 HP0-Y11
NO.19 What is a capability of the Secure Access Wizard supported by ProCurve Identity Driven Manager?
A. It configures 802.1X authenticator ports and RADIUS server settings on a switch.
B. It verifies the integrity of the ProCurve Identity Driven Manager database using Active Directory.
C. It conceals all security-related credentials stored in the switch configuration before backing up the file.
D. It checks a switch configuration file's 802.1X, Web, or MAC authentication settings for consistency and
reports any
errors.
Answer:A
HP prüfungsunterlagen HP0-Y11 prüfungsfragen HP0-Y11 HP0-Y11 originale fragen
NO.20 Which EAP methods support authentication of an 802.1X supplicant based on a user's name and
password? (Select two.)
A. SIM
B. TLS
C. TTLS
D. SPAP
E. PEAP
F. CHAP
Answer: CE
HP dumps HP0-Y11 HP0-Y11 testantworten HP0-Y11 exam fragen HP0-Y11 prüfungsunterlagen
Die HP HP0-Y11 Zertifizierungsprüfung ist eine der beliebten und wichtigen Prüfung in der IT-Branche. Wir haben die besten Lerntipps und den besten Online-Service. Wir bieten den IT-Fachleuten eine Abkürzung. Die Fragen zur HP HP0-Y11 Zertifizierungsprüfung von Pass4Test enthalten viele Prüfungsinhalte und Antworten, die Sie wollen. Wenn Sie die Simulationsprüfung von Pass4Test bestehen, dann finden Sie, dass Pass4Test bietet genau was, was Sie wollen und dass Sie sich gut auf die Prüfung vorbereiten können.
没有评论:
发表评论