HP HP0-Y43 prüfung

Jeder hat eine Utopie in seinem Herzen. Manchmal macht dieser unzuerfüllende Traum uns traurig. In der Wirklichkeit ist es doch nicht zu erfüllen. Solange Sie geeignete Maßnahmen treffen, ist alles möglich. Sie können doch die HP HP0-Y43-Prüfung bestehen. Warum?Weil Sie die Produkte von Pass4Test haben. Die Schulungsunterlagen zur HP HP0-Y43-Prüfung von Pass4Test sind die besten Schulungsunterlagen. Sie sind wegen ihrer hohen Erfolgsquote und Effizienz ganz berühmt. Zugleich können Sie auch viel Kraft ersparen. Mit Pass4Test können Sie die Prüfung ganz einfach bestehen und Ihren Traum erfüllen. Sie werden mehr Selbstbewusstsein haben, was zum Erfolg führt.

Ob man in einem bestimmten Bereich den Erfolg macht, spiegelt an Ihren Zertifizierungen, sowie in IT-Industrie. Deshalb wollen viele Leute an HP HP0-Y43 Zertifizierungsprüfungen teilnehmen, um Ihre selbe Fähigkeit zu beweisen. Und es ist nicht einfach, HP HP0-Y43 Zertifizierung zu bekommen. Aber wenn sie den kürzeren Weg finden, können Sie diese Prüfung leicht bestehen. So wollen Wir Ihnen Pass4Test dumps empfehlen. Es kann Ihnen helfen, weniger Zeit zu verwenden und die Prüfung zu bestehen.

Sie können im Inernet kostenlos die Lerntipps und Teil der Prüfungsfragen und Antworten zur HP HP0-Y43 Zertifizierungsprüfung von Pass4Test als Probe herunterladen.

Mit einem HP HP0-Y43 Zertifikat kann der Berufstätige in der IT-Branche eine bessere Berufsmöglichkeit haben. Das HP HP0-Y43 Zertifikat ebnet den Berufstätigen in der IT-Branche den Weg zur erfolgreichen Karriere!

Exam Code: HP0-Y43
Prüfungsname: Implementing HP Network Infrastructure Solutions Exam
Aktulisiert: 2013-12-15
Nummer: 62 Q&As

HP0-Y43 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/HP0-Y43.html

NO.1 A network includes a mix of IGMPv2 and IGMPv3 endpoints and must support the following source
specific multicasting applications:
-Source: 10.1.4.2 and Group: 232.0.5.5
-Source: 10.1.4.12 and Group 232.0.6.6
The network is already implementing PIM-SM and IGMPv3. In order to support these applications, the HP
10500 switches that act as routers for the endpoints in question must support another feature. Which step
must the network administrator perform on each of these switches?
A. Create an SSM policy that includes 232.0.5.5 and 232.0.6.6 within its range
B. Enable IGMPv2 backward compatibility mode
C. Configure two SSM maps, each of which mapsa source to its multicast group
D. Enable PIM SSM on the interfaces that connect to the endpoints
Answer: C

HP   HP0-Y43   HP0-Y43   HP0-Y43 originale fragen

NO.2 A customer requires an HP FlexCampus solution with a core that scales to 40/100G. Which HP switch
fabric meets this need?
A. the 7500's CLOS switch fabric
B. the 10500's CLOS switch fabric
C. the 7500's crossbar switch fabric
D. the 10500's crossbar switch fabric
Answer: B

HP   HP0-Y43   HP0-Y43 originale fragen   HP0-Y43 zertifizierungsfragen

NO.3 Which switch is best suited to act at the edge of a medium to large HP FlexFabric solution?
A. 10500
B. 5500
C. 9500
D. 5830
Answer: D

HP prüfungsfragen   HP0-Y43   HP0-Y43 prüfungsfragen   HP0-Y43 exam fragen   HP0-Y43 antworten

NO.4 A company has a network that includes HP 5800 and 12500 switches. Usage demands on the
company's FTP servers have increased, causing performance issues during peak usage times. While
analyzing link utilization, the network administrator noticed that the most heavily utilized links experience
bursts of congestion, causing them to drop traffic. The links then experience brief periods of low utilization
followed by another burst of congestion. This pattern continues periodically throughout the peak utilization
time.
What should the network administrator do to attempt to create a more efficient traffic pattern on these
links?
A. Configure an outbound traffic policing policy on the ports in question, setting the CIR at about sixty
percent of the ports' capacity and the PIR at about eighty percent.
B. Apply Weighted Fair Queuing (WFQ) or Weighted Round Robin (WRR) scheduling in preference to
Strict Priority (SP) scheduling on the ports in question.
C. Configure inbound traffic policing policies on ports at the core, setting the CIR at about sixty percent of
the ports' capacity and the PIR at about eighty percent. Apply outbound generic traffic shaping (GTS) on
ports facing the core ports, setting the CIR equal to the CIR on the core ports.
D. Apply a WRED table to the ports in question, optionally adjusting the table values to drop lower priority
traffic first.
Answer: D

HP   HP0-Y43   HP0-Y43   HP0-Y43 prüfungsfragen

NO.5 How can a high density of ports and high throughput at the core of an HP FlexNetwork save customers
money?
A. Intelligence is offloaded from the edge switches, enabling customers to save money on the most
numerous switches in their solutions.
B. The customer can combine the data center and campus LAN core into a single entity, reducing power
and cooling costs.
C. The customer no longer needs to deploy modular switches at the distribution level and the edge,
deploying more cost-effective stackable switches instead.
D. The architecture can be simplified, eliminating expensive distribution devices and reducing power and
cooling costs.
Answer: D

HP   HP0-Y43 echte fragen   HP0-Y43 originale fragen   HP0-Y43   HP0-Y43 dumps

NO.6 A company has a service level agreement (SLA) with its service provider. The SLA specifies a 2 Mbps
committed information rate (CIR) and 20 KB committed burst size (CBS). Lately, during peak usage times,
the company has been experiencing brief periods of poor performance on its external connection
(GigabitEthernet port 2/0/1 on an HP 5800 switch).
How can the network administrator configure the Comware switch to address this problem?
A. Configure a traffic classifier that selects all traffic and a car traffic behavior that sets the CIR to 2 Mbps
and the CBS to 20 KB. Create a QoS policy that maps the classifier to the action and apply this policy as
an inbound policy on port GigabitEthernet 2/0/1.
B. Enable Strict Priority (SP) scheduling on port GigabitEthernet 2/0/1 and ensure that all inbound traffic is
marked with the correct priority.
C. Configure generic traffic shaping (GTS) on the GigabitEthernet port 2/0/1, setting the CIR to 2 Mbps
and the CBS to 20 KB.
D. Configure a traffic classifier that selects all traffic and a car traffic behavior that sets the CIR to 2 Mbps
and the CBS to 20 KB. Create a OoS policy that maps the classifier to the action and apply this policy as
an outbound policy on port GigabitEthernet 2/0/1.
Answer: C

HP prüfung   HP0-Y43   HP0-Y43   HP0-Y43 echte fragen   HP0-Y43 echte fragen   HP0-Y43 dumps

NO.7 What is the role of neighbor solicitation (NS) messages in the autoconfiguration of an IPv6 address.?
A. An IPv6 node sends an NS message to inform a node undergoing autoconfiguration that it is already
using a particular address.
B. An IPv6 node sends an NS message for its tentative address to determine whether another node is
using it.
C. An IPv6 node sends an NS message for the global prefix to prompt other IPv6 nodes to advertise the
addresses that they are using on that prefix.
D. An IPv6 node sends an NS message to prompt an IPv6 router on the link to advertise the global
prefixes associated with the link immediately.
Answer: B

HP testantworten   HP0-Y43   HP0-Y43   HP0-Y43

NO.8 View the exhibit.
A network administrator wants to configure an HP 5800 switch to place all incoming traffic on the
GigabitEthernet 1/0/1 port in priority queue 3. However, one exception applies. All traffic incoming on that
port that is destined to UDP port 55555 should be forwarded in priority queue 4 and marked with DSCP
32.
Based on the current configurations shown in the exhibit, which further steps must the network
administrator perform? (Select two.)
A. Configure port GigabitEthernet 1>0/1 to trust DSCP
B. Apply QoS policy Policy1 as on inbound policyon port GigabitEthernet 1/0/l
C. Apply QoS policy Policy2 as on inbound policyon port GigabitEthernet 1/0/1
D. Create a OoS Ip-dscp mapthat maps Ip value 4 to DSCP02
E. Undo OoS trust on port GigabitEthernet 1/0/1
Answer: B,E

HP   HP0-Y43 prüfungsfrage   HP0-Y43 prüfungsunterlagen   HP0-Y43 testantworten   HP0-Y43

NO.9 View the exhibit.
The exhibit shows a network with HP 5400 zl and 8200 zl switches throughout the core and edge. What is
one advantage of implementing routing on edge switches?
A. Typically, it is easier to implement user-based VLAN assignments.
B. The topology has higher redundancy because edge switches can take over routing roles when
necessary.
C. Typically, the network can use fewer total VLANs when edge switches implement routing.
D. Typically, it is easier to ensure that routed links between edge and core switches are fully utilized.
Answer: D

HP prüfungsunterlagen   HP0-Y43   HP0-Y43 prüfungsfrage   HP0-Y43   HP0-Y43

NO.10 View the exhibits.
Exhibit 1
The frame has these characteristics:
-VLANID = 3
-802.1p = 3
-DSCP=32
-Source IP address = 10.1.1.5
Click here for Exhibit 2
The frame shown in Exhibit 1 arrives on an HP 5800 switch's GigabitEthernet port 1/0/1. QoS maps are at
their default settings. Based on the configuration shown in Exhibit 2, to which queue is the outbound
packet assigned?
A. 2
B. 3
C. 4
D. 5
Answer: D

HP   HP0-Y43 antworten   HP0-Y43 prüfungsfragen   HP0-Y43 prüfung   HP0-Y43

Pass4Test bietet Ihnen die neusten 1Z1-536 exam Unterlagen und 00M-654 pdf Fragen & Antworten mit hoher Qualität. Unser CAT-221 zertifizierung und 3107 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 646-365 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.

Artikel Link: http://www.pass4test.de/HP0-Y43.html