Es ist Ihnen weis, Pass4Test zu wählen, um die Symantec ST0-237 Zertifizierungsprüfung zu bestehen. Sie können im Internet teilweise die Fragen und Antworten zur Symantec ST0-237 Zertifizierungsprüfung von Pass4Test kostenlos herunterladen. Dann werden Sie mehr Vertrauen in unsere Produkte haben. Sie können sich dann gut auf Ihre Symantec ST0-237 Zertifizierungsprüfung vorbereiten. Für den Fall in der Prüfung, zahlen wir Ihnen die gesammte Summe zurück.
Wenn man an sich glaut, kann man wirklich was erreichen. Der Grund, warum Pass4Test jedem IT-Fachmann helfen kann, liegt in seiner Fähigkeit. Die Schulungsunterlagen zur Symantec ST0-237-Prüfung von Pass4Test können Ihnen zum Erfolg verhelfen. Jede Beschränkung fängt im Herzen an. Wenn Sie die Symantec ST0-237-Prüfung bestehen wollen, werden Sie Pass4Test wählen. Eigentlich ist die Distanz zwischen Erfolg und Niederlage nicht weit. Pass4Test führt Sie zum Erfolg.
Exam Code: ST0-237
Prüfungsname: Symantec Data Loss Prevention 12 Technical Assessment
Aktulisiert: 2013-11-21
Nummer: 300 Q&As
Die Schulungsunterlagen zur Symantec ST0-237 Zertifizierungsprüfung von Pass4Test hat eine große Ähnlichkeit mit den realen Prüfungen. Sie können in unseren Prüfungen den realen Prüfungsfragen begegnen. Das zeigt die Fähigkeiten unseres Expertenteams. Nun sind viele IT-Fachleute ganz ambitioniert. Sie beteiligen sich an der IT-Zertifizierungsprüfung, um sich den Bedürfnissen des Marktes anzupassen und ihren Traum zu verwirklichen.
Das Expertenteam von Pass4Test nutzt ihre Erfahrungen und Kenntnisse aus, um die Schulungsunterlagen zur Symantec ST0-237 Zertifizierungsprüfung zu bearbeiten. Unsere Schulungsunterlagen zur Symantec ST0-237 Zertifizierungsprüfung sind bei den Kunden sehr beliebt. Das sind die Ergebnisse der fleißigen Experten-Teams. Diese Simulationsfragen und Antworten sind von guter Qualität. Und die Ähnlichkeit beträgt über 95%. Sie sind eher zuverlässig. Wenn Sie die Trainingsinstrumente von Pass4Test benutzen, können Sie 100% die Symantec ST0-237 Zertifizierungsprüfung bestehen.
Wenn Sie die Pass4Test Website klicken, wundern Sie sich vielleicht, das viele Leute jdentag Pass4Test besuchen. Das ist ganz normal. Wir bieten den Kandidaten zahlreiche Schulungsunterlagen, mit denen sie die Prüfung bestehen können. Das heißt, dass die Schulungsunterlagen wirklich wirksam sind. Wenn Sie die Schulungsunterlagen kaufen wollen, verpassen Sie Pass4Test nicht. Und Sie werden sicher mit unseren Produkten zufrieden.
ST0-237 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/ST0-237.html
NO.1 You are managing a Storage Foundation 5.0 server that has Storage Foundation Management
Server (SFMS) software installed. You force a placement policy to a file system using the Storage
Foundation Management Server (SFMS).
What is the outcome when a policy is forced to a file system?
A. The current policies of the file system are overwritten by the SFMS policies.
B. The file system will retain its policies and discard the SFMS policies.
C. The file system will incorporate the changes of both the policies.
D. The file system will apply the SFMS policies only in the case where its own policies cannot be
assigned.
Answer: A
Symantec ST0-237 zertifizierungsfragen ST0-237 antworten ST0-237 dumps ST0-237
NO.2 An incident responder is viewing a discover incident snapshot and needs to determine which
information to provide to the next level responder.Which information would be most useful in
assisting the next level responder with data clean-up?
A. Incident Details: Message Body content
B. Custom Attributes: Most Active User from Data Insight
C. Incident Details: File Owner metadata
D. Access Information: File Permissions
Answer: B
Symantec prüfungsunterlagen ST0-237 ST0-237 ST0-237 ST0-237
NO.3 An information security officer has detected an unauthorized tool on desktops being used to
transmit data with encrypted communications.
Which Symantec Data Loss Prevention feature should the information security officer use to prevent
this tool from accessing confidential data?
A. removable storage monitoring
B. network protocol monitoring
C. application path filtering
D. application monitoring
Answer: D
Symantec ST0-237 ST0-237
NO.4 You need to create a new volume. The new volume will only use disks on controller 1. You
want to execute the vxassist command with the ctlr:c1 storage attribute. You want to ensure that
the command provides desired output.
What should you ensure to meet the required goal?
A. Ensure that storage attribute is a part of the disk group.
B. Ensure that storage attribute is a part of the plex.
C. Ensure that storage attribute is a part of the disk.
D. Ensure that storage attribute is a part of the volume.
Answer: A
Symantec originale fragen ST0-237 zertifizierung ST0-237 ST0-237 ST0-237 antworten ST0-237 zertifizierungsfragen
NO.5 Which two locations can the administrator verify a newly created policy was loaded on a
detection server? (Select two.)
A. System > Servers > Overview
B. System > Servers > Server Detail
C. Manage > Policies > Policy List
D. System > Servers > Overview > Configure Server
E. System > Servers > Events
Answer: B,E
Symantec prüfungsfrage ST0-237 echte fragen ST0-237 ST0-237 ST0-237 zertifizierung
NO.6 You have a system that has two disks-disk01 and disk02, which are mapped into the system
configuration during boot as disks c0t0d0s2 and c0t1d0s2, respectively. A failure has caused disk01
to become detached.What would you do to view the status of the failed disk01?
A. Use the vxdg list command
B. Use the vxdg -s list command
C. Use the vxprint command
D. Use the vxdisk list command
Answer: D
Symantec ST0-237 zertifizierung ST0-237
NO.7 Which is a limitation of using CDS disk layout under VxVM 4.0 or above?
A. The CDS format cannot contain a private region and a public region on a single partition.
B. The CDS format cannot be used with hardware RAID controllers.
C. The CDS format cannot be used in conjunction with OS-level partitioning.
D. The CDS format cannot be used for boot disks.
Answer: D
Symantec ST0-237 ST0-237 zertifizierungsantworten ST0-237 antworten ST0-237 zertifizierungsantworten
NO.8 When you attempt to start the RAID-5 volume, you are prompted with an error message
"VxVM ERROR V-5-1-1237 Volume r5vol is not startable; some subdisks are unusable and the parity
is stale." You want to remove this error and start the RAID-5 volume.
How will you ensure that you do not encounter this error again?
A. Use a single RAID-5 log plex in RAID-5 volumes.
B. Change the subdisks.
C. Use two or more RAID-5 log plexes in RAID-5 volumes.
D. Reattach the subdisks.
Answer: C
Symantec antworten ST0-237 ST0-237 exam fragen ST0-237 ST0-237
NO.9 You have a nonredundant concatenated volume named datavol in a disk group named datadg.
The volume has a file system on it. One of the underlying disks of the volume called datadg02 fails
temporarily due to a power failure. You fix the problem of the power failure, and ensure that the
disk is powered back again. You ensure that both the system and VxVM can see the disk again. Then,
you reattach the disk back to the disk media record.
Which command will you execute next to be able to run fsck on the file system?
A. vxvol -g datadg start datavol
B. vxrecover -s datavol
C. vxrecover -ns
D. vxvol -g datadg -f start datavol
Answer: D
Symantec prüfungsfrage ST0-237 zertifizierung ST0-237 testantworten ST0-237 ST0-237 exam fragen
NO.10 An incorrectable I/O error has occurred on a RAID volume due to a disk failure that caused
the data on the disk to become unavailable. For the RAID volume, the subdisk becomes unavailable
and is considered stale and detached.What is the RAID level in the volume in this situation?
A. 0
B. 2
C. 4
D. 5
Answer: D
Symantec ST0-237 zertifizierung ST0-237 zertifizierungsfragen
NO.11 A system administrator has a large amount of data that is not being accessed on the
company's storage devices. This excess amount of data is causing slow access to the active data. You
want to set up automatic relocation of data so that data expires as per its defined age.
What should you do?
A. Use the Data Movement Service (DMS) to set the threshold for automatic relocation of data.
B. Use the Quality of Storage Service (QoSS) to set the threshold for automatic relocation of data.
C. Use the Virtual Data Aging Service (VDAS) to set the threshold automatic relocation of data.
D. Use the Intelligent Volume Service (IVS) to set the threshold for automatic relocation of data.
Answer: B
Symantec ST0-237 ST0-237 ST0-237 echte fragen ST0-237 exam fragen
NO.12 A DLP administrator needs to forward data loss incidents to the company's Security
Information and Event Management (SIEM) system.Which response rule action provides the
administrator with the ability to accomplish this task?
A. All: Send Email Notification
B. All: Log to a Syslog Server
C. All: Add Note
D. All: Set Attribute
Answer: B
Symantec ST0-237 prüfungsfragen ST0-237 antworten
NO.13 Which valid automated response option should an administrator choose for Email Prevent?
A. modify the message subject or add specific RFC-2822 headers
B. add metadata to email headers of confidential email
C. modify the body of email messages containing confidential data
D. process confidential email re-routed to a specified email list
Answer: A
Symantec prüfungsunterlagen ST0-237 ST0-237 ST0-237 zertifizierungsfragen
NO.14 You need to create a volume for the HR department. You need to mount a file system with a
high demand for I/O throughput. You are aware that spanning the volume across multiple disks will
increase the I/O performance.Which risk should you be aware of when spanning the volume across
multiple disks?
A. Write throughput degradation
B. Single disk failure causes volume failure
C. Requirement for disk redundancy
D. Poor I/O performance
Answer: B
Symantec exam fragen ST0-237 ST0-237 zertifizierung
NO.15 What is the minimum percentage of spare disks in a disk group?
A. 10%
B. 15%
C. 20%
D. 25%
Answer: A
Symantec dumps ST0-237 ST0-237 zertifizierungsantworten
NO.16 In System Overview, the status of a detection server is shown as 'unknown'. Examination of
the detection server reveals all Vontu services are running.
Which port is blocked and causing the server to be in the 'unknown' state?
A. 443
B. 8000
C. 8100
D. 8300
Answer: C
Symantec ST0-237 testantworten ST0-237 prüfung ST0-237 ST0-237 zertifizierungsfragen
NO.17 Which rule will you use to discover disabled controllers failures in the Storage Foundation
5.0 environment?
A. vxse_host
B. vxse_disk
C. vxse_disklog
D. vxse_dc_failures
Answer: D
Symantec testantworten ST0-237 ST0-237 ST0-237
NO.18 After installing Veritas Enterprise Administrator, you start the VEA with the profile name that
you have specified.When you click the Console View, what does it display? (Select two.)
A. Active Events
B. Volume Summary
C. Alerts
D. Disk History
Answer: A,C
Symantec prüfungsfragen ST0-237 zertifizierung ST0-237 exam fragen ST0-237 zertifizierungsfragen ST0-237
Wenn Sie eine gute Lernwebsite, die Ihnen hilft, die ST0-237 Prüfung zu bestehen, ist Pass4Test die beste Wahl. Per Pass4Test können Sie die Spitzenfertigkeiten in der IT-Branche meistern und die Symantec ST0-237 Zertifizierungsprüfung leicht bestehen. Es ist allen bekannt, dass diese Prüfung schwer zu bestehen ist. Und die Erfolgsquote für die Prüfung ist sehr niedrig. Aber Sie können geeignete Lerninstrumente und Fragen und Antworten zur Symantec ST0-237 Zertifizierungsprüfung von Pass4Test wählen. Diese Schulungsunterlagen ist nicht nur vollständig, sondern umfasst auch viele Wissensgebiete. Ihre Ähnlichkeit mit den echten Prüfungen ist sehr hoch. Das wird von der Praxis bewiesen. Wenn Sie die Symantec ST0-237 Zertifizierungsprüfung bestehen, wählen Sie doch Pass4Test. Ganz richtig!
没有评论:
发表评论