Pass4Test ist eine Website, die die Erfolgsquote von HP HP0-144 Zertifizierungsprüfung erhöhen kann. Die erfahrungsreichen IT-Experten entwickeln ständig eine Vielzahl von Programmen, um zu garantierern, dass Sie die HP HP0-144 Zertifizierungsprüfung 100% erfolgreich bestehen können. Die Trainingsinstrumente von Pass4Test sind sehr effektiv. Viele IT-Leute, die die Prüfung bestanden haben, haben die Prüfungsfragen und Antworten von Pass4Test benutzt. Mit der Hilfe von Pass4Test haben viele auch die HP HP0-144 Zertifizierungsprüfung bestanden. Wenn Sie Pass4Test wählen, kommt der Erfolg auf Sie zu.
Nach den Forschungen über die Fragen und Antworten in den letzten Jahren sind die Fragen und Antworten zur HP HP0-144 Zertifizierungsprüfung von Pass4Test den realen Prüfung sehr ähnlich. Pass4Test verspricht, dass Sie zum ersten Mal die HP HP0-144 Zertifizierungsprüfung 100% bestehen können.
Exam Code: HP0-144
Prüfungsname: HP (ProCurve Secure WAN)
Wir alle wissen, dass im Zeitalter des Internets ist es ganz einfach, die Informationen zu bekommen. Aber was fehlt ist nänlich, Qualität und Anwendbarkeit. Viele Leute surfen im Internet die Schulungsunterlagen zur HP HP0-144 Zertifizierungsprüfung. Und Sie wissen einfach nicht, ob sie zu glauben ist. Hier empfehle ich Ihnen die Schulungsunterlagen zur HP HP0-144 Zertifizierungsprüfung. Sie haben im Internet die höchste Kauf-Rate und einen guten Ruf. Sie können im Internet Teil der Prüfungsfragen und Antworten zur HP HP0-144 Zertifizierungsprüfung von Pass4Test kostenlos herunterladen. Dann können Sie entscheiden, Pass4Test zu kaufen oder nicht. Und Sie können auch die Echtheit von Pass4Test kriegen.
Die Fragen zur HP HP0-144 Zertifizierungsprüfung werden nach dem Lehrkompendium und den echten Prüfungen bearbeitet. Wir aktualisieren auch ständig unsere Schulungsunterlagen, so dass Sie in erster Zeit die neuesten und besten Informationen bekommen. Wenn Sie unsere Schulungsunterlagen zur HP HP0-144 Zertifizierungsprüfung kaufen, können Sie einen einjährigen kostenlosen Update-Service bekommen. Sie können jederzeit Abonnmentszeit verlängern, so dass Sie mehr Zeit haben, sich auf die Prüfung vorzubereiten.
HP0-144 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/HP0-144.html
NO.1 What determines the number of Asynchronous Transfer Mode (ATM) subinterfaces you configure for
an Asymmetric Digital Subscriber Line (ADSL) connection?
A. the number of LANs you want to connect to the Internet
B. the number of access control lists (ACLs) you want to apply to the ADSL interface
C. the amount of bandwidth you want to reserve for upstream and downstream transmissions
D. the number of virtual circuits you want to establish
Answer: D
HP HP0-144 zertifizierungsantworten HP0-144 HP0-144 HP0-144 HP0-144
NO.2 When you are configuring an Asymmetric Digital Subscriber Line (ADSL), what is the purpose of
training mode?
A. ADSL is dependent upon line quality; ADSL devices must determine the best way to use the line.
B. ADSL devices always negotiate the signaling standard used, based on the type of DSLAM used by the
public carrier.
C. The ADSL device and the DSLAM must identify the fastest switched virtual circuit (SVC) available.
D. The training mode is essentially a testing phase to determine if the ADSL module itself is working
correctly.
Answer: A
HP antworten HP0-144 HP0-144 exam fragen HP0-144 HP0-144
NO.3 You have configured an Integrated Services Digital Network (ISDN) backup for your organization's
Frame Relay connection. When this connection goes down, which virtual interface could establish and
maintain the backup connection?
A. a backup Asynchronous Transfer Mode (ATM) interface
B. a backup Frame Relay interface
C. a backup Point-to-Point Protocol (PPP) interface
D. a backup BRI ISDN interface
Answer: C
HP HP0-144 zertifizierung HP0-144 prüfungsfrage HP0-144 exam fragen
NO.4 Which interfaces can be configured as DHCP clients? Select TWO.
A. BRI interface
B. ADSL interface
C. ATM subinterface
D. Ethernet interface
E. Frame Relay interface
F. DSX-1 or G. 703 interface
Answer: CD
HP HP0-144 dumps HP0-144
NO.5 Which type of connection may be used for the backup modules on the ProCurve Secure Router?
A. Asymmetric Digital Subscriber Line (ADSL)2+, Annex A or Annex B
B. T1 or E1 connections
C. Integrated Services Digital Network (ISDN) connection
D. Asynchronous Transfer Mode (ATM) connection
Answer: C
HP zertifizierung HP0-144 dumps HP0-144 HP0-144 zertifizierungsfragen
NO.6 Which command allows you to use enable mode commands from any mode except basic mode?
A. the get command
B. the go command
C. the nomode command
D. the do command
Answer: D
HP zertifizierung HP0-144 testantworten HP0-144 zertifizierungsfragen HP0-144 prüfungsunterlagen HP0-144 antworten
NO.7 Which Quality of Service (QoS) features does the ProCurve Secure Router support? Select TWO.
A. custom queuing
B. low latency queuing (LLQ)
C. weighted fair queuing (WFQ)
D. generic traffic shaping (GTS)
E. Frame Relay traffic shaping (FRTS)
Answer: BC
HP antworten HP0-144 exam fragen HP0-144 zertifizierung
NO.8 Which function does the virtual path identifier/virtual channel identifier (VPI/VCI) perform?
A. It identifies the endpoint for an Asynchronous Transfer Mode (ATM) connection.
B. It identifies the tunnel endpoint for virtual private network (VPN) peers.
C. It identifies the permanent virtual circuit (PVC) in a Frame Relay network.
D. It defines each peer in a Point-to-Point Protocol (PPP) connection, if authentication is configured.
Answer: A
HP zertifizierung HP0-144 HP0-144 prüfung HP0-144
NO.9 Which type of firewall monitors traffic on several layers of the Open Systems Interconnection (OSI)
model?
A. packet-filtering firewall
B. circuit-level gateway
C. application-level gateway
D. stateful-inspection firewall
Answer: D
HP zertifizierung HP0-144 HP0-144 HP0-144
NO.10 The Asymmetric Digital Subscriber Line (ADSL) keeps going into training mode. What is causing this
problem?
A. The signaling type configured for the router does not match the signaling type used by the service
provider.
B. The encapsulation type configured for the router does not match the type used by the service provider.
C. The signal-to-noise (SNR) margin configured for the router is too high.
D. The ADSL interface has not been assigned an IP address.
Answer: C
HP zertifizierungsfragen HP0-144 HP0-144 antworten HP0-144 zertifizierungsantworten
NO.11 Which steps must you complete to enable access to the ProCurve Secure Router's web interface?
Select TWO.
A. Enable the ftp server.
B. Enable the http server.
C. Configure a Telnet password.
D. Configure an enable mode password.
E. Configure a username and password.
F. Configure an ACL permitting FTP traffic.
Answer: BE
HP HP0-144 dumps HP0-144 HP0-144 exam fragen
NO.12 What must you do to configure Point-to-Point Protocol over Ethernet (PPPoE) for an Asymmetric
Digital Subscriber Line (ADSL)?
A. Configure and bind the ATM interface to the ADSL interface; then bind the ATM subinterface to a PPP
interface.
B. Configure a PPP interface; then bind the PPP interface to the ADSL interface.
C. Configure both an ATM interface and a PPP interface, and bind the ADSL interface to both virtual
interfaces.
D. Configure a PPPoE interface and bind it directly to the ADSL interface.
Answer: A
HP HP0-144 HP0-144 prüfungsfrage HP0-144
NO.13 The status of the BRI interface is "connected." What does a connected status indicate?
A. The backup module is installed in the ProCurve Secure Router and is ready to be configured.
B. The BRI interface has been assigned to a primary connection.
C. The BRI interface is ready to provide a backup connection.
D. The BRI interface is currently providing a backup connection.
Answer: D
HP HP0-144 HP0-144 prüfungsfragen HP0-144
NO.14 How can you configure the ProCurve Secure Router so that a backup module does not establish a
backup connection with an unauthenticated peer?
A. Set the backup call mode so that the module cannot answer calls until the primary connection goes
down.
B. Configure PAP or CHAP on the backup interface.
C. Add an authentication, authorization, and accounting (AAA) list to the backup interface.
D. Add authenticated routers' hostnames to the global configuration mode database.
Answer: B
HP originale fragen HP0-144 zertifizierungsantworten HP0-144 antworten HP0-144 exam fragen
NO.15 Click the Exhibit button.
You want your ProCurve Secure Router to act as a gateway device for any remote VPN client who
initiates IKE in its most secure mode. Which policy shown contains the correct configurations for this
use?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
Answer: C
HP HP0-144 HP0-144 prüfungsfrage HP0-144 HP0-144 prüfungsunterlagen HP0-144 originale fragen
NO.16 How many access control lists (ACLs) can you apply directly to one interface?
A. 1
B. 2
C. 5
D. unlimited number
Answer: B
HP originale fragen HP0-144 HP0-144 HP0-144 HP0-144
NO.17 Which tasks can you use CompactFlash to complete? Select TWO.
A. Configure routers at remote sites.
B. Increase RAM on the router by configuring virtual memory.
C. Enter bootstrap mode.
D. Back up configuration files.
E. Enable IPSec security.
F. Store and view the Secure Router OS in an uncompressed format.
Answer: AD
HP HP0-144 exam fragen HP0-144 zertifizierungsfragen HP0-144 originale fragen HP0-144 HP0-144
NO.18 What is a disadvantage of dynamic routing?
A. Dynamic routing does not allow you to restrict which networks are included in routing tables.
B. Dynamic routing can consume bandwidth and CPU processes on the router.
C. Dynamic routing is less scalable than static routing.
D. Dynamic routing makes adding new networks to a WAN difficult.
Answer: B
HP zertifizierungsfragen HP0-144 dumps HP0-144 HP0-144
NO.19 Which feature does the ProCurve Secure Router 7203dl provide that the ProCurve Secure Router
7102dl does not?
A. built-in encryption module
B. support for redundant power source (RPS)
C. one additional Ethernet port
D. support for up to 6 ADSL lines
Answer: B
HP zertifizierungsfragen HP0-144 echte fragen HP0-144 HP0-144 HP0-144
NO.20 Before the ProCurve Secure Router and the DSL Access Multiplexer (DSLAM) exchange
Asynchronous Transfer Mode (ATM) cells, they utilize physical-layer signaling to establish an Asymmetric
DSL (ADSL) connection. Which monitor evaluates the signal-to-noise ratio (SNR) margin while the router
and the DSLAM establish the physical ADSL connection?
A. ADSL monitor
B. showtime monitor
C. phase 1 monitor
D. training monitor
Answer: D
HP HP0-144 prüfung HP0-144 zertifizierung HP0-144
Unser Pass4Test bietet den Kandidaten nicht nur gute Produktem sondern auch vollständigen Service. Wenn Sie unsere Produkte benutzen, können Sie einen einjährigen kostenlosen Update-Service genießen. Wir benachrichtigen den Kandidaten in erster Zeit die neuen Prüfungsmaterialien mit dem besten Service.
没有评论:
发表评论