Wenn Sie wollen, dass Sie durch die Juniper JN0-541 Zertifizierungsprüfung Ihre Position in der heutigen kunkurrenzfähigen IT-Branche und Ihre beruflichen Fähigkeiten verstärken, müssen Sie mit breiten fachlichen Kenntnissen ausgerüstet sein. Und es ist nicht so einfach, die Juniper JN0-541 Zertifizierungsprüfung zu bestehen. Vielleicht ist die Juniper JN0-541 Zertifizierungsprüfung ein Sprungbrett, um im IT-Bereich befördert zu werden. Aber man braucht doch nicht, sich mit so viel Zeit und Energie für die Prüfung vorbereiten. Sie können unsere Pass4Test Produkte wählen, die speziellen Trainingsinstrumente für die IT-Zertifizierungsprüfungen bieten.
Sie können im Internet teilweise die Fragen und Antworten zur Juniper JN0-541 Zertifizierungsprüfung von Pass4Test kostenlos herunterladen, so dass Sie unsere Qualität testen können. Solange Sie unsere Produkte kaufen, versprechen wir Ihnen, dass wir alles tun würden, um Ihnen beim Bestehen der Prüfung zu helfen.
Mit Pass4Test können Sie ganz leicht die Juniper JN0-541-Prüfung bestehen. Wenn Sie die Juniper JN0-541-Trainingsinstrumente im Pass4Test wählen und die Prüfungsfragen und Anworten zur Juniper JN0-541 Zertifizierungsprüfung herunterladen, werden Sie sicher selbstbewusster sein, dass Sie die Prüfung ganz leicht bestehen können. Obwohl es auch andere Trainingsinstrumente zur Juniper JN0-541-Zertifizierungsprüfung in anderen Websites gibt, versprechen wir Ihnen, dass unsere Produkte am besten unter ihnen sind. Unsere Übungsfragen-und antworten sind sehr genau. Die Trainingsmaterialien umfassen viele Wissensgebiete. Sie sind immer erneuert und ergänzt. Deshalb steht unser Pass4Test Ihnen eine genauige Prüfungsvorbereitung zur Verfügung. Wenn Sie Pass4Test wählen, können Sie viel Zeit ersparen, ganz leicht und schnell die Zertifizierungsprüfung zur Juniper JN0-541 Zertifizierungsprüfung bestehen und so schnell wie möglich ein IT-Fachmann in der Juniper IT-Branche werden.
Im 21. Jahrhundert, wo es viele Exzellente gibt, fehlen doch IT-Fachleute. Die Gesellschaft brauchen viele IT-Fachleute. IT-Zertifizirungsprüfung ist eine Methode, die Fähigkeit der IT-Leute zu prüfen. Aber es ist nicht so einfach, die IT-Zertifizirungsprüfung zu bestehen. Normalerweise werden die IT-Kandidaten an einem Kurs teilnehmen. Der Schulungskurs von Pass4Test ist von guter Qualität. Einen guten Kurs zu suchen ist die Garantie für den Erfolg. Die Ähnlichkeit der Übungen von Pass4Test beträgt 95%. Wenn Sie die Übungen von Pass4Test benutzen, können Sie 100% die IT-Zertifizierungsprüfung nur einmal bestehen.
Exam Code: JN0-541
Prüfungsname: Juniper (IDP, Associate(JNCIA-IDP))
Die Prüfungsfragen und Antworten von Pass4Test Juniper JN0-541 bieten Ihnen alles, was Sie zur Testvorbereitung brauchen. Für Juniper JN0-541-Prüfung können Sie auch Fragen aus anderen Websites oder Büchern finden. Aber Hauptsache, sie müssen logisch verbindend. Unsere Fragen und Antworten ermöglichen es Ihnen, mühelos die Prüfung zum ersten Mal zu bestehen. Zugleich können Sie auch viele wertvolle Zeit sparen.
JN0-541 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/JN0-541.html
NO.1 Which statement is true regarding IDP rule matching on a sensor?
A. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further.
B. Each rule in the IDP rule base that matches on the source IP, destination IP, and service will be
processed further, unless the particular rule is terminal.
C. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further.
D. Each rule in the IDP rule base that matches on the source IP, destination IP, service, and attack object
will be processed further, unless the particular rule is terminal.
Answer: B
Juniper JN0-541 zertifizierung JN0-541 JN0-541 dumps
NO.2 Which command on the IDP sensor CLI can be used to display the sensor statistics, which policy is
installed, and mode of sensor deployment?
A. sctop "s" option
B. sensor statistics can only be displayed from Security Manager GUI
C. scio list s0 sensor stat
D. scio sensor stat
Answer: A
Juniper JN0-541 prüfung JN0-541 JN0-541 zertifizierungsantworten
NO.3 What is "a deviation from a protocol's expected behavior or packet format"?
A. context
B. compound attack object
C. attack signature
D. protocol anomaly
Answer: D
Juniper JN0-541 JN0-541 zertifizierung JN0-541 zertifizierungsfragen
NO.4 You update your attack object database on Security Manager. What must you do before the new attack
objects become active on the IDP sensors?
A. You install the updated security policy on the IDP sensor.
B. No changes are required.
C. You must restart the IDP sensor.
D. You must restart the IDP processes on the IDP sensors.
Answer: A
Juniper antworten JN0-541 JN0-541 prüfung JN0-541 zertifizierungsantworten JN0-541
NO.5 When connecting to a sensor using SSH, which account do you use to login?
A. admin
B. super
C. netscreen
D. root
Answer: A
Juniper JN0-541 JN0-541 echte fragen
NO.6 Which three fields in a packet must match an IDP rule before that packet is examined for an attack?
(Choose three.)
A. terminate match
B. service
C. destination address
D. source address
E. attack object
Answer: B,C,D
Juniper JN0-541 JN0-541 originale fragen JN0-541 originale fragen
NO.7 After you enable alerts for new hosts that are detected by the Enterprise Security Profiler, where do you
look in Security Manager to see those alerts?
A. Security Monitor > Profiler > Application Profiler tab
B. Security Monitor > Profiler > Violation Viewer tab
C. Security Monitor > Profiler > Network Profiler tab
D. Log Viewer > Profiler Log
Answer: D
Juniper JN0-541 JN0-541 antworten
NO.8 Which TCP port is used for communication between Security Manager and an IDP sensor?
A. 7801
B. 7800
C. 7803
D. 443
Answer: C
Juniper JN0-541 JN0-541 prüfungsfrage JN0-541 JN0-541 originale fragen JN0-541
NO.9 Which statement is true about the attack object database update process?
A. Each sensor updates its own attack object database automatically; however they must be able to
access the Juniper site on TCP port 443.
B. The attack object database update must be manually performed by the administrator, and the
administrator must manually install it on each sensor.
C. The attack object database update can be initiated manually or automatically.
D. The attack object database update can be automatically scheduled to occur using the Security
Manager GUI.
Answer: C
Juniper JN0-541 prüfungsfragen JN0-541 zertifizierung JN0-541
NO.10 Which OSI layer(s) of a packet does the IDP sensor examine?
A. layers 2-7
B. layers 2-4
C. layer 7 only
D. layers 4-7
Answer: A
Juniper JN0-541 JN0-541 dumps JN0-541 zertifizierungsfragen JN0-541
NO.11 On a sensor, which command will indicate if log messages are being sent to Security Manager.?
A. scio vr list
B. serviceidp status
C. scio agentstats display
D. scio getsystem
Answer: C
Juniper JN0-541 antworten JN0-541 antworten JN0-541 JN0-541 zertifizierung JN0-541 originale fragen
NO.12 Which two will change the management IP of an IDP sensor? (Choose two.)
A. Edit the existing IDP sensor object in Security Manager GUI and change the IP address.
B. Delete the IDP sensor object from Security Manager and re-add the sensor with the new IP address.
C. Useifconfig to change the management IP address.
D. Use the ACM to change the management IP address.
Answer: B,D
Juniper JN0-541 JN0-541 JN0-541 zertifizierungsfragen JN0-541
NO.13 A newly re-imaged sensor is running IDP 4.0 code. You want to assign IP address
10.1.1.1 to the sensor. Which method do you use to do this?
A. Connect to the sensor's console port, login as root, and answer theEasyConfig
B. Use SSH to connect to the sensor at IP 192.168.1.1.Login as root, and run ipconfig.
C. Connect to the sensor's console port, login as admin, and answer theEasyConfig
D. Use SSH to connect to the sensor at IP 192.168.1.1.Login as admin, and run ipconfig.
Answer: A
Juniper zertifizierungsantworten JN0-541 echte fragen JN0-541 JN0-541 JN0-541
NO.14 Which rule base would detect netcat?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: C
Juniper JN0-541 antworten JN0-541 JN0-541 exam fragen
NO.15 Which statement about the Enterprise Security Profiler (ESP) is true?
A. The ESP must be configured and started using the IDP sensor CLI before it is used.
B. The administrator must manually initiate Security Manager to sensor polling to retrieve ESP data.
C. The ESP must be configured and started on each IDP sensor manually, using the Security Manager
GUI.
D. The ESP is started by default in IDP version 4.0 or newer.
Answer: C
Juniper JN0-541 originale fragen JN0-541 echte fragen JN0-541 zertifizierungsantworten
NO.16 Which type of cable do you use for a console connection to an IDP sensor?
A. CAT 5 cable
B. Juniper proprietary cable
C. straight-through serial cable
D. null-modem cable
Answer: D
Juniper originale fragen JN0-541 prüfungsunterlagen JN0-541 prüfungsunterlagen JN0-541 prüfungsfragen JN0-541 zertifizierung
NO.17 What is one use of an IP action?
A. It blocks subsequent connections from specific IP addresses.
B. It modifies the IP header to redirect the attack.
C. It modifies the IP header to prevent the attack.
D. It permits or denies the traffic, based on the IP header.
Answer: A
Juniper zertifizierungsantworten JN0-541 JN0-541 echte fragen
NO.18 Which rule base would detect the use of nmap on a network?
A. SYN protector
B. traffic anomalies
C. backdoor
D. exempt
Answer: B
Juniper antworten JN0-541 zertifizierungsantworten JN0-541 prüfungsunterlagen JN0-541 JN0-541 JN0-541 echte fragen
NO.19 Which statement is true about packet capture in the IDP sensor?
A. The Log Viewer has no indication of whether a log message has associated packet captures.
B. You can only log packets after an attack packet.
C. You can configure a particular number of packets to capture before and after an attack.
D. Packet capture records all packets flowing through the sensor.
Answer: C
Juniper JN0-541 zertifizierungsfragen JN0-541 JN0-541
NO.20 Exhibit:
You work as an administrator at Certkiller .com. Study the exhibit carefully. In the exhibit, which SYN
protector mode is the IDP using?
A. passive
B. handshake
C. relay
D. protective
Answer: A
Juniper dumps JN0-541 antworten JN0-541 exam fragen JN0-541 zertifizierungsfragen JN0-541
Wenn Sie Pass4Test wählen, steht der Erfolg schon vor der Tür. Und bald können Sie Juniper JN0-541 Zertifikat bekommen. Das Produkt von Pass4Test bietet Ihnen 100%-Pass-Garantie und auch einen kostenlosen einjährigen Update-Service.
没有评论:
发表评论